Homeowners relaxing on an A-DIY deck kit in a Colorado Springs, CO backyard
Colorado Springs, CO

Deck Builders Near Me in Colorado Springs, CO? Build Your Own Deck With an A-DIY Kit

Build your own deck with professionally engineered, ready-to-assemble wood and composite deck kits, delivered curbside to homes across Colorado Springs and El Paso County. Framing, decking, Tuff Block footings and hardware are included, and a drill is the only tool you need.

Contractor, Traditional DIY or Deck Kit: 3 Ways to Get a Deck in Colorado Springs

Search “deck builders near me” in Colorado Springs and you’ll find busy crews that book up fast once spring arrives. Compare hiring a deck contractor, building from raw lumber and assembling an A-DIY deck kit to find the right fit for your budget, timeline and yard.

Hire a Colorado Springs Deck Builder
Option 01

Hire a Colorado Springs Deck Builder

A full-service deck contractor handles design, PPRBD permits, footings, framing and cleanup. It is the best choice for attached, elevated, multi-level or hillside decks. Get several written quotes and expect to wait for a spot on the calendar during the spring rush.

Upfront cost
Your time & effort
Planning guesswork
Traditional DIY
Option 02

Traditional DIY

Buy lumber, hardware and decking from a local yard, then work out the design, spans, cuts and layout on your own. It suits experienced builders who own the tools and have plenty of weekends to spare.

Upfront cost
Your time & effort
Planning guesswork
Finished A-DIY wood deck
I am far from a handyman but the wife wanted a deck in the backyard and I couldn’t see myself dishing out $20,000 for someone to come build it for us. I ended up seeing an ad for this company and was blown away by the price and ease of install. 2 of our neighbours ended up ordering as well!
Imran K. · Google review

Hiring a Deck Contractor in Colorado Springs? Ask These Questions

  1. 01Have you built decks in Colorado Springs or El Paso County recently?
  2. 02Can you show current liability and workers’ comp insurance?
  3. 03Will you pull the permit with the Pikes Peak Regional Building Department?
  4. 04How deep will footings go, and how will you handle expansive soil?
  5. 05Is my home in the WUI area, and how does that affect the decking?
  6. 06Which lumber grade and decking product is in the quote?
  7. 07Are stairs, railings, demolition and haul-away included?
  8. 08What is the payment schedule, start date and workmanship warranty?
Shop Deck Kits

Which deck is right for you?

Wood or composite. Two ways to make it yours. One remarkably simple way to build it.

Every A-DIY deck includes:

Engineered for

Engineered for

15,000+ lbs

Assembles in a

Assembles in a

few hours

Grade 1 Treated &

Grade 1 Treated &

Kiln-Dried Lumber

Professional-grade

Professional-grade

structural system

5-year structural

5-year structural

warranty

Engineered for

Engineered for

15,000+ lbs

Assembles in a

Assembles in a

few hours

Grade 1 Treated &

Grade 1 Treated &

Kiln-Dried Lumber

Professional-grade

Professional-grade

structural system

5-year structural

5-year structural

warranty

Best Selling

Wood Deck Kit

From$3,699.00

Grade 1 Southern Yellow Pine. Pressure Treated and Kiln Dried.

SHOP NOW →

Real wood beauty

Authentic Southern Yellow Pine with the warmth, texture, and character only real wood can offer.

Kiln-dried, pressure-treated lumber

Grade 1 lumber engineered to help reduce warping, twisting, and shrinking over time.

Finish it your way

Can be stained or sealed to match your home, your backyard, and your style.

Lower upfront investment

A more budget-friendly way to get a professional-grade deck system.

Ongoing maintenance required

Best for homeowners who don’t mind occasional sealing, staining, and upkeep.

Best for:

Homeowners who want the natural look of real wood and more flexibility at a lower starting price.

LOW MAINTENANCE

Composite Deck Kit

From$5,700.00

Engineered For Lasting Beauty.

SHOP NOW →

Premium wood-inspired finish

Rich, natural-looking colors designed to deliver the look of wood with a more refined finish.

Low-maintenance surface

No sanding, staining, or sealing required

Fade and splinter resistant

Built to stay beautiful season after season with less upkeep.

25-Year Warranty

Structural, stain & fade warranty on composite boards.

Premium long-term ownership

A higher-end option for homeowners who want less maintenance and more convenience.

Best for:

Homeowners who want the look of wood without the regular upkeep.

Planning a Deck in Colorado Springs: Climate, Snow and Weather Considerations

Sitting at roughly 6,000 feet at the foot of Pikes Peak, Colorado Springs pairs strong sunshine and dry air with spring snowstorms, gusty winds and summer hail. Factor all of it into where you put your deck and which decking you choose.

Built for high-altitude Colorado Springs backyards Built for high-altitude Colorado Springs backyards

Spring Snow and Deck Load

Some of the heaviest, wettest snow of the year can fall in March and April. Applicable A-DIY configurations are engineered to hold up to 15,000 lbs when properly assembled and supported. Clear snow with a plastic shovel rather than letting it pile up.

Freeze-Thaw and Expansive Soils

Big day-to-night temperature swings and clay soils that swell when wet can shift footings. Freestanding ground-level decks, like A-DIY kits that sit 15–17 inches off the ground on Tuff Block footings, should be checked for level each spring.

Dry Air, Wind and Hail

Low humidity and wind dry wood quickly, which can lead to checking. Summer thunderstorms can bring hail, so inspect the surface after big storms and keep board gaps clear of debris.

High-Altitude UV and Wildfire

Thinner air means stronger UV, so seal pressure-treated wood every one to two years or choose composite. In the city’s wildland-urban interface area, new or rebuilt decks need ignition-resistant or noncombustible decking surfaces, so check your address first.

≈33 in.

Average seasonal snowfall at the Colorado Springs airport

≈6,000 ft

Elevation of Colorado Springs, with intense high-altitude UV

15,000 lbs

Engineered load rating for applicable A-DIY decks

Apr – Oct

Typical deck-building window in Colorado Springs

Homeowners enjoying a finished A-DIY deck in spring
Order in winter · build in spring

When Is the Best Time to Build a Deck in Colorado Springs?

Most Colorado Springs homeowners build between April and October. Order over the winter so your kit can arrive once the late-spring snows are behind you.

  1. Nov – FebPlan & reserve

    Measure, pick a size and material, check PPRBD permit rules and lock in today’s price.

  2. Mar – AprPrep the site

    Schedule delivery around spring storms and level the site once the ground dries out.

  3. May – JunBuild

    Mild, dry days make for an easy weekend build or a quick install.

  4. Jul – OctEnjoy & protect

    Build in the mornings to dodge afternoon storms, and seal wood before winter.

Reserve for Spring Delivery — $250

A-DIY Reserve: a non-refundable $250 deposit holds today’s price for a future delivery date you choose.

How Does A-DIY Work for Colorado Springs Homeowners?

  1. PLAN

    Choose the Size and Material

    Select an available deck size, pressure treated or composite surface and applicable options.

  2. PLAN

    Review the Property

    Confirm the available space, ground conditions, slope, proposed height, drainage and delivery access.

  3. PLAN

    Confirm Permits and Foundations

    Contact the local building department and select a suitable foundation system for the property.

  4. DELIVER

    Receive the Deck Kit

    The coordinated components are delivered to the property.

  5. BUILD

    Assemble It or Hire Local Help

    Complete the assembly yourself or hire a local handyman.

  6. BUILD

    Complete Required Inspections

    Arrange any inspections or final approvals required by the municipality.

A homeowner assembling A-DIY deck joists beside a travel trailer
WATCHHow Does A-DIY Work

What’s Included in Every A-DIY Deck Kit

Each A-DIY deck kit arrives as one coordinated system packed in a crate, so the only tool you supply is a drill. The driver bit is included.

Footings

Tuff Block footings for a stable, freestanding base.

6x6 Beams and 2x8 Joists

Heavy-duty 6x6 beams and 2x8 joists spaced 13–14 inches on center.

Decking Boards

Pre-sealed 5.5-inch pressure-treated boards or composite boards.

Hardware and Fasteners

Galvanized, corrosion-resistant screws and brackets, plus the driver bit.

Labeled, Color-Coded Parts

Every component is marked so you know where it goes.

Step-by-Step and 3D Instructions

A printed guide plus an online 3D instructional app.

Engineering Diagrams

Structural layout, beam and joist sizes and post locations for your permit questions.

Real Build Support

Deck specialists by phone and live chat from order to final board.

Exploded diagram of an A-DIY deck kit showing decking, joists, beams and footings

Make It Yours: Steps, Railings and Custom Sizes

Kits assemble 15–17 inches off the ground. Add steps, railings or a longer post kit with bracing for a raised deck, or ask about a size that isn’t listed. Our deck specialists will help you plan the right layout for your yard.

Uneven Ground, Elevated Decks and Foundation Options

An A-DIY deck may be installed over sloped or uneven ground by adjusting the supporting post heights to establish a level deck surface.

Elevated A-DIY deck with stairs and railings beside a home
A-DIY deck on adjustable posts over sloped ground
UP TO APPROX. 40inches Supported elevation

Supported Elevation

Supported configurations may be elevated to approximately 40 inches using the appropriate posts, foundations and bracing.

Depending on the height and configuration, the project may also require:

  • Longer posts
  • Additional bracing
  • Stairs
  • Railings
  • Additional engineering
  • Permit approval

Foundation and Footing Options

Depending on the property, configuration and local approval, suitable systems may include:

  • Sonotubes
  • Helical piles
  • Ground screws
  • In-ground posts
  • Approved surface footing systems
  • Other site-specific foundations

Colorado Springs Deck Permits and Building Code Information

In Colorado Springs, deck permits come from the Pikes Peak Regional Building Department, and the answer depends on the deck’s size, height, attachment to the house and whether it serves an exit door. Use the quick check below, then confirm with PPRBD and City zoning for your address.

Rule of thumb: attached decks, decks over 200 sq ft and decks more than 30 inches above grade usually need a building permit.

Permit quick check

General guidance for Colorado Springs-area decks

Is the deck attached to your house?
Yes
A permit is usually required
No
Is it more than 30 in. above grade?
Yes
Permit usually required
No
Often exempt*

*PPRBD exempts detached decks for one- and two-family homes that are 200 sq ft or less, no more than 30 in. above grade within 36 in. of the perimeter and not serving the required egress door. Zoning setbacks and WUI rules can still apply.

Deck Permits & Building Codes in Colorado Springs, CO

Inside Colorado Springs City LimitsCity of Colorado Springs

Inside Colorado Springs City Limits

Building permits and inspections are handled by the Pikes Peak Regional Building Department, while City Planning reviews zoning and setbacks. Lots in the Colorado Springs Fire Department’s WUI area also face deck material rules.

El Paso County and Nearby TownsPikes Peak Region

El Paso County and Nearby Towns

PPRBD also serves unincorporated El Paso County and towns such as Fountain, Monument, Manitou Springs and Palmer Lake. Each sets its own zoning rules, and county or town appendices to the code can add local changes.

Local Codes, Not a Statewide CodeColorado

Local Codes, Not a Statewide Code

Colorado has no statewide residential building code. The region enforces the 2023 Pikes Peak Regional Building Code, built on the 2021 International Residential Code with local amendments.

How to Get a Deck Permit in Colorado Springs

  1. Step 1Check zoning and setbacks

    Confirm setbacks, easements and any HOA or WUI requirements for your lot.

  2. Step 2Prepare a site plan and drawings

    Show the deck’s size, height, location and footings. A-DIY engineering diagrams can help.

  3. Step 3Submit to PPRBD

    Apply with the Pikes Peak Regional Building Department online or in person.

  4. Step 4Schedule inspections

    Book the footing and final inspections your permit requires, then enjoy the deck.

Questions to Ask Your Building Department

  • Does my deck need a permit?
  • What setbacks apply to my lot?
  • Is a site plan or survey required?
  • How deep must the footings be?
  • Are stamped plans required?
  • Which inspections are required?
  • Are guards required at this height?
  • Can the homeowner do the work?
Not sure what your lot allows?

Our deck specialists can help you plan size, height and placement before you apply.

  • Dimensions
  • 2x8 joists
  • Beams
  • Post locations

Can A-DIY Diagrams Help With My Permit?

Yes. Engineering diagrams for applicable A-DIY configurations show dimensions, structural layout, beam and joist sizes and post locations to support your application. Your department may still ask for a survey, site plan or stamped documents.

Requirements change and can differ between neighboring municipalities. Always confirm current rules with your local building department before you build.

Deck Kit Delivery Across Colorado Springs and the Pikes Peak Region

A-DIY ships deck kits by LTL freight to homes throughout Colorado Springs, El Paso County and the Pikes Peak Region. The carrier calls ahead to schedule curbside delivery, typically within 10–14 business days.

Colorado Springs Deck FAQs

Are there deck builders near me in Colorado Springs, or can I build my own deck?

You can do either. Colorado Springs has plenty of deck contractors for custom, multi-level and attached decks; ask for written quotes, proof of insurance and recent work in El Paso County. If a freestanding deck fits your yard, A-DIY ships professionally engineered wood and composite deck kits to Colorado Springs homes, ready for you or a local handyman to assemble with a drill.

How much does it cost to build a deck in Colorado Springs, and is DIY cheaper?

Contractor prices depend on size, materials, height, footings, permits and local labor rates. A-DIY deck kits run from $3,699 for a 6x12 pressure-treated kit to $12,799 for a 16x28 composite kit. Because labor is a large share of a contractor’s price, homeowners typically spend 30–50% less building a kit themselves. Kit prices don’t include permit fees, site prep or hired help.

How much does a 12x12, 12x16 or 16x20 deck cost?

With A-DIY, a 12x12 deck kit is $4,899 in pressure-treated wood or $5,700 in composite. A 12x16 composite kit is $6,600; the closest wood size is 12x18 at $5,969. A 16x20 kit is $7,600 in wood or $10,199 in composite. Framing, decking, footings and hardware are included.

Do I need a permit to build a deck in Colorado Springs?

Building permits for Colorado Springs, unincorporated El Paso County and several nearby towns are issued by the Pikes Peak Regional Building Department (PPRBD), which enforces the 2023 Pikes Peak Regional Building Code based on the 2021 International Residential Code. Attached decks, decks over 200 sq ft and decks more than 30 inches above grade generally need a permit. Zoning and setbacks are reviewed separately, so check with the City or county planning office too.

What size deck can I build without a permit in Colorado Springs?

PPRBD’s list of work exempt from permit includes detached decks for one- and two-family homes that are no more than 200 sq ft, not more than 30 inches above grade at any point within 36 inches of the deck’s perimeter and don’t serve the required egress door. Attached decks always need a permit. An exempt deck must still meet code, zoning setbacks and any wildfire rules for your lot.

Can I put a hot tub on an A-DIY deck?

Many customers use their A-DIY decks for hot tubs and saunas. Applicable configurations are engineered to hold up to 15,000 lbs when properly assembled and supported, but tub weight, placement and wiring vary, so talk to a deck specialist before you order and check local electrical and permit rules.

How deep do deck footings need to be in Colorado Springs, and can I build a floating deck?

Footings for attached decks generally must extend below the frost depth PPRBD requires, often cited as 30 inches in the Pikes Peak region, so confirm the current figure before you dig. Expansive clay soils are also common along the Front Range. Freestanding ground-level decks, like A-DIY kits that sit 15–17 inches off the ground on Tuff Block footings, don’t need a ledger on the house, but whether floating footings are accepted on a permitted deck is up to the building official.

How does Colorado Springs weather affect a deck?

At about 6,000 feet, Colorado Springs gets intense UV, dry air, big daily temperature swings, gusty winds and summer hail. Seal pressure-treated wood every one to two years or choose composite decking, keep snow cleared and check the deck for level each spring. Lots in the Colorado Springs Fire Department’s wildland-urban interface (WUI) area have extra rules for deck materials, so check your address before you order.

When is the best time to build a deck in Colorado Springs?

Most homeowners build from April through October, when the ground has thawed and days are mild. Spring and early summer are the most popular months, and contractors book up quickly. Ordering in winter lets your kit arrive as soon as the weather turns; just plan build days around afternoon thunderstorms in July and August.

What deck kit sizes does A-DIY offer?

Pressure-treated wood kits come in 15 sizes: Standard 12x12, 12x18, 12x20, 12x24, 12x28, 16x16, 16x20, 16x24 and 16x28, plus Compact 6x12, 6x16, 6x20, 8x12, 8x16 and 8x20. Composite kits come in 9 sizes from 12x12 to 16x28 in Amazon Gray or Forest Wood. Custom sizes are available on request.

Does A-DIY deliver deck kits to Colorado Springs and nearby towns?

Yes. A-DIY ships by LTL freight to homes across Colorado Springs and the Pikes Peak Region, including Fountain, Security-Widefield, Monument, Falcon, Manitou Springs and Woodland Park. The carrier calls ahead to schedule curbside delivery, typically within 10–14 business days.

How can I pay for an A-DIY deck kit in Colorado Springs?

You can pay in full, split the cost into 0% payments over up to 8 months, or build now and pay later with Affirm, Klarna or Shop Pay, subject to approval. Not ready to build yet? A-DIY Reserve holds today’s price with a $250 non-refundable deposit.

Ready to Build Your Own Deck in Colorado Springs?

Pick from 15 pressure-treated and 9 composite deck kit sizes, get advice from a deck specialist and have a professionally engineered kit delivered anywhere in Colorado Springs and El Paso County.

Engineered system

Coordinated, labeled components with engineering diagrams.

Delivered to Colorado Springs

Typically within 10–14 business days.

Real deck specialists

Phone and live chat support from planning to the final board.

Explore Deck Kits

Prefer to talk? Call our deck specialists at 1 (786) 358-2872