Deck Builders in Wyoming: WY Deck Costs, Permits and a Faster Way to Build

Wyoming homeowners can hire a local deck builder, frame a deck themselves from raw lumber, or order an A-DIY engineered deck kit. The A-DIY kit arrives at your door as a complete system, and you, a friend or a local handyman can assemble it in a few hours with nothing more than a drill.

Contractor pricing in Wyoming swings with the deck’s size, the decking material, its height above grade and local labor rates, and because builders are spread thin across a big state, quotes in resort towns like Jackson and in remote counties can run well above those in Cheyenne or Casper. A-DIY deck kits start at $3,699 for pressure-treated wood and $5,700 for composite, typically 30–50% less than hiring a contractor. Use our deck cost calculator to compare prices in your area.

Yes. An engineered deck kit delivers a true structural deck without paying for a contractor’s design time or a full crew, which matters in a state where qualified builders can be booked out for a season. The A-DIY kit ships with everything you need, footings included, so there is no measuring, cutting or driving to the lumber yard for missing pieces.

No. A-DIY is not a contractor and does not install decks. We design, engineer and deliver complete deck kits to addresses across Wyoming. You can assemble it yourself or hire any local handyman, carpenter or contractor to do it for you.

Yes. Many Wyoming homeowners have a local handyman put their A-DIY kit together. The components arrive ready to assemble with step-by-step instructions, so the job takes a fraction of the hours a custom build needs, and that keeps the labor bill small even where skilled help is scarce.

It depends on where you live. Wyoming has no statewide residential building code, so permits are required only where a city or county has adopted and enforces its own code, typically a recent International Residential Code. Cheyenne, Casper, Gillette, Laramie and most larger towns do permit and inspect decks, while some rural counties have no building code outside their incorporated towns. Call your city or county building office before you order.

Cheyenne permits are issued by the Compliance Department’s Building Permitting and Licensing Division, which runs applications, plan review and inspection scheduling through the city’s online OpenGov portal. The city enforces the 2024 International Residential Code with local amendments, requires contractors to hold a City of Cheyenne license, and offers a homeowner-as-contractor option for owners doing their own work, so contact the division to confirm what your deck needs before you build.

There is no statewide number. Each jurisdiction that enforces a residential code sets its own frost line: Laramie County lists 36 inches, Casper three feet to the top of the footing, Gillette 42 inches to the bottom of the footing and Teton County 34 inches. The International Residential Code as commonly adopted exempts decks not supported by the house from the frost-line rule, but local amendments vary and some departments want full-depth footings on every deck, so confirm with your building office.

Yes. On a sloped or uneven Wyoming lot, an A-DIY deck is leveled by adjusting the heights of the supporting posts instead of regrading the site. Supported configurations can be elevated to approximately 40 inches using the appropriate posts, foundations and bracing.

Every A-DIY kit ships with Tuff Block footings. If your site, deck height or local frost-depth rule calls for something else, the deck can be set on sonotubes, helical piles, ground screws, in-ground posts or an approved surface footing system instead.

Both perform in Wyoming. Pressure-treated wood costs less and takes stain or sealer well, but Wyoming’s intense high-altitude sun, very dry air, constant wind and freeze-thaw winters dry it out, check it and gray it quickly, so it needs sealing on a regular schedule. Composite costs more upfront but never needs sanding, staining or sealing, resists fading and splintering, and its boards carry a 25-year warranty.

Applicable A-DIY deck configurations are engineered to hold up to 15,000 pounds when properly assembled, supported and installed according to the applicable specifications. Every A-DIY deck system also includes a five-year structural warranty.

A-DIY delivers to cities and towns across Wyoming, typically within 10–14 business days. All components and hardware arrive together, so you can start assembling the day the delivery lands and make the most of the short building season.

Yes. You can choose Build Now, Pay Later financing through Affirm (subject to approval), 0% split payments over up to eight months, or A-DIY Reserve, a $250 deposit that locks in today’s price for a future delivery date.

Yes. For an applicable A-DIY configuration, the diagrams show the dimensions, structural layout, beam, joist and post locations, lumber sizes and major connections, which is the information Wyoming building departments typically ask for with a deck permit application. Your local office may still request a plot plan, survey or stamped documents, and it has the final say, so approval is not guaranteed.